EPS Block Molding Machine


Write your message here and send it to us

Product Detail

Product Tags

EPS Block Molding Machine
Whole process: EPS Beads–pre-expander –silo–block molding machine–cutting machine –EPS sheets or profile
Auxiliary equipment: Steam boiler and accumulator , Air compressor and Air receiver , water cooling tower and pumps
EPS block molding Application: EPS sheet for insulation / EPS element for construction / EPS profile for decoration

Daily 300 cubic Meter EPS Block Production Line list:

1 BATCH PRE-EXPANDER SPJ150B
Density :8-30g/l
1unit
2 EPS BLOCK MOLDING MACHINE SPB400
WITH VACUUM SYSTEM LENGTH
Length 4m x 1.2 mx 1m
1unit
3 CUTTING MACHINE SPC400 1units
4 Re-Cycling Machine 1unit
B Auxiliary Equipment  
5 SILO(Semi-Auto) SYSTEM 20units
6 AIR COMPRESSOR   3.6m3/min, 7 bar 1unit
7 COMPRESSED AIR TANK WITH ACCESSARY  2 m2 1unit
8 STEAM ACCUMULATOR  12m3 volumn 1unit
    9 COOLING WATER PUMP,COOLING TOWER
50m3/hour , as well as 7.5kw pump.
 unit
10 STEAM BOILER   2 tons per hour , 1Mpa 1unit

Block molding machine :

Item   type PSB-DZ200 PSB-DZ300 PSB-DZ400 PSB-DZ600
Mould cavity size mm 2040*1240*1030(mm) 3060*1240*1030(mm) 4080*1240*1030(mm) 6100*1240*1030(mm)
Block size  mm 2000*1200*1000(mm) 3000*1200*1000(mm) 4000*1200*1000(mm) 6000*1200*1000(mm)
Steam entry DN80 DN80 DN150 DN150
  consumption 30-50kg/cycle 50-70kg/cycle 60-90kg/cycle 100-130kg/cycle
  pressure 0.8Mpa 0.8Mpa 0.8Mpa 0.8Mpa
Compressed Air entry DN40 DN40 DN40 DN40
  consumption 1.5-2 m3 /cycle 1.8-2.2 m3 /cycle 2-2.5 m3 /cycle 2-3 m3 /cycle
  pressure 0.6Mpa 0.6Mpa 0.6Mpa 0.6Mpa
Cooling water entry DN40 DN40 DN40 DN40
  consumption 0.2-0.4 m3 /cycle 0.4-0.6 m3 /cycle 0.6-0.8 m3 /cycle 0.8-1 m3 /cycle
  pressure 0.4-0.6Mpa 0.4-0.6Mpa 0.4-0.6Mpa 0.4-0.6Mpa
Drainage vacuum drain Φ125mm Φ125mm Φ125mm Φ125mm
  steam vent Φ100mm Φ100mm Φ200mm Φ200mm
  condensate Φ100mm Φ100mm Φ100mm Φ100mm
  Blower outlet Φ125mm Φ125mm Φ150mm Φ150mm
Throughput 15kg/m3 5min/cycle 6min/cycle 7min/cycle 8min/cycle
Power kw 20.5-24.5kw 20.5-24.5kw 24.5-35.5kw 24.5-35.5kw
Overall dimension L*W*H 5700*4000*2850(mm) 7200*4500*3000(mm) 11000*4500*3000(mm) 2600*3960*2906(mm)
Weight kg 6000kg 7200kg 12000kg 15000kg
Room height required mm 6000mm 6000mm 6000mm 6000mm

Cutting machine :

ITEM UNIT SPQ6000P
Suitable for block size    mm 6000*1250*1000
Min. Cutting thickness    mm 20
Cutting speed    m/min 0.5-1
Max. Wires in horizontal    piece 51
Max. Wires in cross vertical    piece 6
Max. Wires in cross cutting    piece 1
Hot wire specification    mm 0.4-0.8
Connected load    Kw 13
Power supply    V/HZ 380/50
Weight    Kg 1500
Contour size   MM 8500*1800*2500

  • Previous:
  • Next: