 |
The GB-SPR-L Crushing & Dedusting Integrated Recycling Machine represents the latest innovation in EPS scrap recycling. Comprising a crusher, a dust collector, and a mixer, this Eco-Friendly Foam Recycling Crusher offers numerous advantages including increased capacity, reduced dust emission rates, and precise proportional mixing. Thanks to this advanced recycling system, waste EPS scraps are converted into exceptionally clean and qualified beads. These recycled beads can subsequently be blended with new EPS expansion beads for the production of EPS blocks.
| Size: | |
|---|---|
| Quantity: | |
GB-SPR-L
GREEN BUILDING MACHINERY
Features a low-speed, multi-non-sharp knife crusher and a high-speed pin grinder to ensure high efficiency and minimal dust production. Keeps the dust rate below 10%.
The filter mesh can be changed for different purposes.
Enclosed shell design prevents any dust from escaping.
A two-stage de-dust system ensures highly efficient dust removal.
Interval compressed air cleaning of the mesh significantly improves the capacity of de-dusting.
Equipped with an Automatic Dust-Collecting Device featuring a self-cleaning function and an airbag.
Both the recycled material hopper and new material hopper are equipped with high and low liquid level sensors to ensure that material mixing is under fully automatic control.
The filling speed for recycled and new materials is controlled by a screw (DN245), adjusted with a frequency converter according to different mixing rates.
The mixing barrel, along with the stirring motor, ensures even stirring before transferring it to the hopper of the block molding machine.
NO | ITEM | UNIT | FS900 |
1 | Capacity | M3/H | 20-25 |
2 | Power | KW | 18.7 |
3 | Size | mm | 1505x1830x1860 |
4 | Weight | kg | 830 |
5 | Entrance Size | mm | 870 x 500 |
6 | Mesh Size | mm | DN10 |
7 | Qualified Material Size | mm | 4-10 |
8 | Qualified Material Rate | % | 90% |
9 | Dust Rate | % | < 10% |
NO | ITEM | UNIT | PSDR-25 |
1 | Capacity | M3/H | 25-30 |
2 | Power | KW | 8.4 KW |
3 | Size | mm | 3500x1500x2050 |
4 | Duster Collector | mm | 840x840x3000 |
4 | Weight | kg | 700 |
5 | Mesh Size | mm | DN3 |
6 | Suction Volume | M3/H | 2000 |
7 | Air Bag | pecs | 16 |
Features a low-speed, multi-non-sharp knife crusher and a high-speed pin grinder to ensure high efficiency and minimal dust production. Keeps the dust rate below 10%.
The filter mesh can be changed for different purposes.
Enclosed shell design prevents any dust from escaping.
A two-stage de-dust system ensures highly efficient dust removal.
Interval compressed air cleaning of the mesh significantly improves the capacity of de-dusting.
Equipped with an Automatic Dust-Collecting Device featuring a self-cleaning function and an airbag.
Both the recycled material hopper and new material hopper are equipped with high and low liquid level sensors to ensure that material mixing is under fully automatic control.
The filling speed for recycled and new materials is controlled by a screw (DN245), adjusted with a frequency converter according to different mixing rates.
The mixing barrel, along with the stirring motor, ensures even stirring before transferring it to the hopper of the block molding machine.
NO | ITEM | UNIT | FS900 |
1 | Capacity | M3/H | 20-25 |
2 | Power | KW | 18.7 |
3 | Size | mm | 1505x1830x1860 |
4 | Weight | kg | 830 |
5 | Entrance Size | mm | 870 x 500 |
6 | Mesh Size | mm | DN10 |
7 | Qualified Material Size | mm | 4-10 |
8 | Qualified Material Rate | % | 90% |
9 | Dust Rate | % | < 10% |
NO | ITEM | UNIT | PSDR-25 |
1 | Capacity | M3/H | 25-30 |
2 | Power | KW | 8.4 KW |
3 | Size | mm | 3500x1500x2050 |
4 | Duster Collector | mm | 840x840x3000 |
4 | Weight | kg | 700 |
5 | Mesh Size | mm | DN3 |
6 | Suction Volume | M3/H | 2000 |
7 | Air Bag | pecs | 16 |
