 |
| Size: | |
|---|---|
| Quantity: | |
GB-AC100
GREEN BUILDING MACHINERY
This equipment mainly consists of a rack, workbench, motor, welding machine, etc.
Main features of this machine:
1.The equipment is installed horizontally, with good performance and simple operation. It is mainly used for cutting EPS foam. You can make Roman column bases, column caps, curved window covers, and various circular 3D cuts of any radius.
operational principle：
The workpiece is installed on the worktable, and the reducer drives the rolling gear of pushing and pulling foam raw materials to rotate, and at the same time, it is cut and shaped by the model made of heating belt. The range of arc radius is adjusted manually with a screw; Adjustable cutting height.
Installation and commissioning of equipment
1. The equipment is installed on a cement foundation, and the foundation for placing the machine must be flat and adjusted horizontally; Connect the circuit properly.
2. The power supply of this machine adopts a two-phase three wire system, with two 4-squared and one 4-squared neutral wires as the power input, and a voltage of two-phase 220V
3. Press "Power On" to turn on the control power and the device will start working. If the "power off" button is pressed, the control power will be turned off and the motor will stop working.
Serial Number | name | unit | parameter |
1 | External dimensions | mm | 900×1000×1300 |
2 | power | KW | 0.012 |
3 | Welding Machine | 台 | ZX7-200 |
4 | total weight | KG | 80 |
This equipment mainly consists of a rack, workbench, motor, welding machine, etc.
Main features of this machine:
1.The equipment is installed horizontally, with good performance and simple operation. It is mainly used for cutting EPS foam. You can make Roman column bases, column caps, curved window covers, and various circular 3D cuts of any radius.
operational principle：
The workpiece is installed on the worktable, and the reducer drives the rolling gear of pushing and pulling foam raw materials to rotate, and at the same time, it is cut and shaped by the model made of heating belt. The range of arc radius is adjusted manually with a screw; Adjustable cutting height.
Installation and commissioning of equipment
1. The equipment is installed on a cement foundation, and the foundation for placing the machine must be flat and adjusted horizontally; Connect the circuit properly.
2. The power supply of this machine adopts a two-phase three wire system, with two 4-squared and one 4-squared neutral wires as the power input, and a voltage of two-phase 220V
3. Press "Power On" to turn on the control power and the device will start working. If the "power off" button is pressed, the control power will be turned off and the motor will stop working.
Serial Number | name | unit | parameter |
1 | External dimensions | mm | 900×1000×1300 |
2 | power | KW | 0.012 |
3 | Welding Machine | 台 | ZX7-200 |
4 | total weight | KG | 80 |
